Production speed: Up to 30-40 tubes /min...Depends upon the viscosity of the filling material, and the fill volume.
Filling Range : 10-30 ml or more depending on the requirement
Tube dia : 10 – 50mm (Min – Max)
BASIC MACHINE FEATURES:
Supplied Complete with the following, and is set to Fill/Seal any one-tube size
- Manual in feed of empty tubes excluding guarding.
- One set of Tube holder, for any One-tube size with grippers with springs to hold the tubes properly. 40 liters single wall stainless steel hopper made of S.S 304 material.
- The No tube - No fill device. Prevents the dosing action if tube is not present. With a sensor and pneumatic system, to operate only when the tube is there for filling, otherwise the turret will move to the next station.
- Ointment /
Cream dosing Pump head. A piston-dosing pump, consisting of Teflon piston
placed in S.S. cylinder carries out the dosing. One set of piston and
cylinder can fill the following range.
10 – 30gms. / 30 – 100gms / 100-250gms (Depending on material characteristic)
- Filling nozzle consisting of a Positive shut off system, helps eliminates product dripping / stringing, and maintains filling accuracy. (All contact parts are in food-graded material)
- Hot Air blowing station for melting Plastic-Laminated tubes. Hot Air is blown through a hot-air tool, on to the sealing area of the tube. When the tube is lifted for heating, a cooling block (Chilled water is circulated through it) to have a dent free seal.
- Tube Sealing and coding unit, which seals the heated part of the tube and then codes on the seal with metal female type stereos,
- Trimming unit, to trim the end portion of the tube, and to maintain tube length
- S.S covers guard all parts below main functioning area of the machine
- Electrical system consists of a trouble-free electrical panel, along with operating panel board.
- Drive unit consist of 1 HP, 40 RPM 3-phase geared-motor fitted with sprocket for a fix speed. The device is having Geneva mechanism.
- Automatic ejection / discharge of tube. (Tail first)
- 12 station model
- With 40ltr. Capacity plain Hopper
- 10-30 ml syringe pump. or any one size of ur choice
- One set of tube holder for any one tube size dia.
- Specially designed Pneumatic shut off nozzle system for control of tailing for any one size tube
- Ac drive for operating the machine at variable speed
- all component used are of good quality & branded make, list can be provided on request