· Tru Mark Enterprises offers LUG Capping Machine, Semi-automatic twist off capper is pneumatically operated lug capping machine to fix lug caps on the glass jar. Caps are manually placed on jar & finger tight by operator & fed to machine for perfect capping
Ø UNIVERSAL: TRU MARK Semi auto twist off capper is adjustable to work with any size lug caps(up to 90mm dia) & any shape glass jar, NO CHANGE PARTS NEEDED
Ø EASY CHANGEOVER: very easy to set for different size/shape & height of jars & caps, capping length can be set easily, gives uniform capping torque
Ø EFFICIENT: with set-able PLC to adjust component timing & synchronizing all operation together
Ø DURABLE: full SS body structure. contact parts in SS304 grade, SS316 is available on request
- The operator places the cap on the glass jar manually & finger tight it, after that feed it below machine capping head
- as per the model is chosen, the operator actuates the machine cycle by the foot switch or by the sensor.
- Top cylinder makes the capping head down pressing the cap on the jar, simultaneously the horizontal cylinder also grips the jar from side to make it stable while capping
- The capping cylinder or the pneumatic actuator rotates the cap as per preset capping length.
- the capping is done, all cylinder moves to their start position making jar free to remove, The operator remove jar & feed new jar.
· Machine size :1.5 foot Long X 1.5 foot Wide X 2 to 5 feet Height
· Machine weight :40 KGS approx
· Machine Name : Pneumatically operated LUG Capping Machine
· Output :20-30 capped bottles per minute(depends on operator skills)
· Power consumption :230VAC, 50 Hz, 0.5 KWH
· Air Requirement :2 CFM @ 6-8 kg/cm2
VARIENTS /DIFFERENT MODELS:
All models are fully fabricated in stainless steel structure, & are tabletop & comes with foot switch, by default. All Machine needs air compressor at the client end. Cap shall be placed by operator manually on jar & finger tight before feeding to machine
1] ECONOMY MODEL - LC10
both operation, top pressing & cap rotation are pneumatic, jar gripping cylinder is not available in this model, but suits lab purpose & very low production requirements
2] ECONOMY MODEL -LC20
both operation, top pressing & cap rotation are pneumatic, comes with jar gripping cylinder, can be simple pneumatic. Sync with PLC on request or a digital timer to perform the cycle on the single foot switch. Gives uniform result each time, capping length can be preset.
3] STD MODEL - LC50
both operation, top pressing & cap rotation are pneumatic, & added the horizontal jar gripping pneumatic cylinder to hold the jar from rotation while capping which gives More Durability & gives better accuracy. Capping length can be preset. all operation sync with small PLC & can be actuated by a foot switch or sensor or microswitch, This model also available without PLC for slow speed requirements
4] STD MODEL - LC80
both operation, top pressing & cap rotation are pneumatic, & added the horizontal jar gripping pneumatic cylinder to hold jar from rotation while capping which gives More Durability & gives better accuracy. The pneumatic actuator is given for easy setting of Capping length- best suitable for high torque caps. All operation sync with small PLC & can be actuated by a foot switch or sensor or microswitch.
Ø Full table structure.
Ø sensor based operation.
Ø Touch HMI to operate/control.
Ø Combo model with Piston filler.
Lug cap pressing machine, lug cap sealing machine, lug capping machine, pneumatic lug capping machine, JAM bottle capping machine, lug cap tightening machine, semi auto lug capper, automatic lug capping machine.